New product from Arc Building Products.

Arc Drive Reviver is a high-performance coating specially formulated to make existing asphalt and tarmac look like new. It restores colour and provides a tough, durable finish which protects from weathering, oil and petrol spills and unsightly plant/weed growth. 

• Restores colour
• Seals against water and common spills
• Helps prevent moss and weed growth
• Fast-drying
• Made in Ireland

PREPARATION

All surfaces must be dry, clean and free from dust, dirt or debris. For best results clean the tarmac by power washing (using lower pressure to prevent damage). Carry out any necessary repairs using a suitable crack repair or Cold lay pothole repair. Do not apply if it is raining or if rain is forecast within 6-12 hours. If algae or green growth has been present, a pre-treatment with Arc Algae & Greenslime Remover is recommended after cleaning and before sealing. Ensure all cleaning products have been rinsed off and surface dried before application.
It is always recommended to carry out a trial on an inconspicuous area to check appearance, finish and suitability.

APPLICATION

Stir well before and periodically during use. Do not dilute. Apply by brush or roller in an even coat across the entire surface. For best results, apply using a long pile roller in long even strokes. Protect surrounding areas from splashes or overspray. Apply in 2 coats allowing 2-4 hours between coats. Do not allow puddles to form, particularly on textured surfaces, and do not apply in thick layers. Drying time for the final coat will be 2-4 hours depending on conditions. Drying and re-coat times will take longer at lower temperatures and when humidity is high.

View Product