New product from Arc Building Products.

Arc Perma-Clear & Perma-White Silicone is one part, moisture curing silicone sealant. It is specially designed for sanitary applications.

PROPERTIES

• 100 % silicone polymer
• Acetoxy curing system
• Cured with humidity
• High strength
• Solvent free
• Resistant to ozone, ultra-violet radiation and temperature extremes
• Fungus and mildew resistant
• Conforms to ISO 11600-F-G-25 LM
• Resistant to moisture
• Frost resistant up to -40 °C (for 5 cycle)

APPLICATION AREAS

• Sealing in wet areas
• Bathtubs and showers
• Glass to glass screens
• Ceramic tile
• Rimless sinks
• Bathroom and kitchen fixtures

Ensure that surfaces to be sealed are clean, dry and grease free. Cut cartridge seal. Cut the nozzle at a 45° angle to the desired bead thickness. Screw nozzle onto cartridge and place cartridge into caulking gun bottom end first.
For general sealing apply sealant in a continuous steady flow.
Push the sealant ahead of the nozzle to completely fill the joint.
Remove excess sealant immediately using a cloth dampened with mineral turpentine. Arc Perma Clear/White Silicone releases acetic acid during curing. Therefore, it must not be used on mirrors and sensitive metals such as copper, brass and lead. It’s not paintable. It should not be used for aquariums. Prolonged exposure to direct sunlight must be avoided because of discoloring.
It should not be used on porous surfaces such as stone, concrete, marble or granite.

View Product