Tel: 00353 (0)402 32370 sales@arcbuildingproducts.ie
Advanced lightweight tile adhesive technology. Engineered using lightweight recycled fillers and special additives. Strong, flexible and white. Suitable for virtually all tile types and substrates including underfloor heating and timber floors. Outstanding grab and long-term strength. A 15kg bag gives same coverage as 25kg of traditional adhesive. Pourable up to 15mm thick. Can be used to repair and level damaged and uneven wall and floor surfaces. Outstanding workability, mixing and clean up with no slump or shrinkage. Exceeds BS EN 12004 TYPE C2S1.
A grey cement based adhesive for fixing floor tiles to concrete floors. Interior & exterior. Water and frost resistant. High strength and grab. Conforms to BS EN 12004 TYPE C1F..
For fixing ceramic wall and floor tiles, mosaics, quarry tiles, marble, terrazzo, porcelain and fully vitrified tiles. The adhesive when set is water resistant and is suitable for thin bed fixing in internal and external locations including swimming pools. Suitable for use with underfloor heating and tile on tile applications. Suitable for tiling onto plywood floors. Working time is approximately 40 minutes, grout after 2 hours and light foot traffic after 3 hours approximately, depending on conditions. Coverage is 3½kg per square metre at 3mm thickness. Conforms to BS EN 12004 TYPE C2FS1.
Download DoP Form Here
Download Technical Data Sheet Here
Download Safety Data Sheet Here
For fixing ceramic wall and floor tiles, mosaics, quarry tiles, marble, terrazzo, porcelain and fully vitrified tiles. The adhesive when set is water resistant and is suitable for thin bed fixing in internal and external locations including swimming pools. Suitable for use with underfloor heating and tile on tile applications. Suitable for tiling onto plywood floors. Working time is approximately 40 minutes, grout after 2 hours and light foot traffic after 3 hours approximately, depending on conditions. Coverage is 3½kg per square metre at 3mm thickness. Conforms to BS EN 12004 TYPE C2FS1.
Download DoP Form Here
Download Technical Data Sheet Here
Download Safety Data Sheet Here
A white flexible regular setting wall and floor adhesive for fixing ceramic tiles, mosaics, quarry tiles, marble, terrazzo, porcelain and fully vitrified tiles without the need for an admixture in internal and external locations. The adhesive when set is water resistant and may be used in swimming pools. Suitable for use with underfloor heating and timber floors. Coverage is 3½kg per square metre. Grout after 24 hours. Conforms to BS EN 12004 TYPE C2TES1.
Download DoP Form Here
Download Technical Data Sheet Here